Mac Stop Microsoft Smb Domain Server

Posted on by admin
  • You should expect this event when disabling SMB 3 Leasing. Microsoft does not recommend disabling SMB Leasing. Once disabled, traffic from client to server may increase since metadata and data may no longer be retrieved from a local cache. So far this seems to have solved the problem for us.
  • You can start or stop the Samba server automatically (during boot) or manually. Starting and stopping policy is a part of the YaST Samba server configuration described in Section 28.3.1, “Configuring a Samba Server with YaST”. To stop or start running Samba services with YaST, use System › System Services (Runlevel) and check winbind, smb, and nmb.
  • Nov 24, 2015 Hi All, We have updated our main file server from OSX 10.8.5 to 10.11.1. This was mainly done to ensure stability and to help our Windows 7 users who have recently had renewed issues with opening files and keeping them open on the older 10.8.5 server (as per previous problems with white pages.
  • Dec 17, 2018  With Excel you can see the devices and computers using SMBv1. After treatment of all the devices you can disable SMBv1 safely. The most important thing when disabling SMB v1 from production is auditing, following steps on this article you will have all the devices talking SMBv1 with your SMB Servers, you need to understand why these clients are talking SMBv1 and how to remediate.
-->

Summary

First published on TECHNET on Sep 16, 2016 Hi folks, Ned here again and today’s topic is short and sweet: Stop using SMB1. Stop using SMB1. STOP USING SMB1! In September of 2016, MS16-114, a security update that prevents denial of service and remote code execution. If you need this security pa.

This article describes how to enable and disable Server Message Block (SMB) version 1 (SMBv1), SMB version 2 (SMBv2), and SMB version 3 (SMBv3) on the SMB client and server components.

Important

We recommend that you do not disable SMBv2 or SMBv3. Disable SMBv2 or SMBv3 only as a temporary troubleshooting measure. Do not leave SMBv2 or SMBv3 disabled.

In Windows 7 and Windows Server 2008 R2, disabling SMBv2 deactivates the following functionality:

  • Request compounding - allows for sending multiple SMB 2 requests as a single network request
  • Larger reads and writes - better use of faster networks
  • Caching of folder and file properties - clients keep local copies of folders and files
  • Durable handles - allow for connection to transparently reconnect to the server if there is a temporary disconnection
  • Improved message signing - HMAC SHA-256 replaces MD5 as hashing algorithm
  • Improved scalability for file sharing - number of users, shares, and open files per server greatly increased
  • Support for symbolic links
  • Client oplock leasing model - limits the data transferred between the client and server, improving performance on high-latency networks and increasing SMB server scalability
  • Large MTU support - for full use of 10-gigabye (GB) Ethernet
  • Improved energy efficiency - clients that have open files to a server can sleep

In Windows 8, Windows 8.1, Windows 10, Windows Server 2012, and Windows Server 2016, disabling SMBv3 deactivates the following functionality (and also the SMBv2 functionality that's described in the previous list):

  • Transparent Failover - clients reconnect without interruption to cluster nodes during maintenance or failover
  • Scale Out – concurrent access to shared data on all file cluster nodes
  • Multichannel - aggregation of network bandwidth and fault tolerance if multiple paths are available between client and server
  • SMB Direct – adds RDMA networking support for very high performance, with low latency and low CPU utilization
  • Encryption – Provides end-to-end encryption and protects from eavesdropping on untrustworthy networks
  • Directory Leasing - Improves application response times in branch offices through caching
  • Performance Optimizations - optimizations for small random read/write I/O

More Information

The SMBv2 protocol was introduced in Windows Vista and Windows Server 2008.

Windows Smb Server

The SMBv3 protocol was introduced in Windows 8 and Windows Server 2012.

For more information about the capabilities of SMBv2 and SMBv3 capabilities, see the following articles:

How to gracefully remove SMB v1 in Windows 8.1, Windows 10, Windows 2012 R2, and Windows Server 2016

Windows Server 2012 R2 & 2016: PowerShell methods

SMB v1

  • Detect:

  • Disable:

  • Enable:

SMB v2/v3

  • Detect:

  • Disable:

  • Enable:

Windows Server 2012 R2 and Windows Server 2016: Server Manager method for disabling SMB

SMB v1

Windows 8.1 and Windows 10: PowerShell method

SMB v1 Protocol

  • Detect:

  • Disable:

  • Enable:

SMB v2/v3 Protocol

  • Detect:

  • Disable:

  • Enable:

Windows 8.1 and Windows 10: Add or Remove Programs method

How to detect status, enable, and disable SMB protocols on the SMB Server

For Windows 8 and Windows Server 2012

Windows 8 and Windows Server 2012 introduce the new Set-SMBServerConfiguration Windows PowerShell cmdlet. The cmdlet enables you to enable or disable the SMBv1, SMBv2, and SMBv3 protocols on the server component.

Note

When you enable or disable SMBv2 in Windows 8 or Windows Server 2012, SMBv3 is also enabled or disabled. This behavior occurs because these protocols share the same stack.

You do not have to restart the computer after you run the Set-SMBServerConfiguration cmdlet.

SMB v1 on SMB Server

  • Detect:

  • Disable:

  • Enable:

For more information, see Server storage at Microsoft.

SMB v2/v3 on SMB Server

  • Detect:

  • Disable:

  • Enable:

For Windows 7, Windows Server 2008 R2, Windows Vista, and Windows Server 2008

To enable or disable SMB protocols on an SMB Server that is runningWindows 7, Windows Server 2008 R2, Windows Vista, or Windows Server 2008, use Windows PowerShell or Registry Editor.

PowerShell methods

Note

This method requires PowerShell 2.0 or later version of PowerShell.

SMB v1 on SMB Server

Detect:

Default configuration = Enabled (No registry key is created), so no SMB1 value will be returned

Disable:

Enable:

Note You must restart the computer after you make these changes.For more information, see Server storage at Microsoft.

Mac Connect To Smb Server

SMB v2/v3 on SMB Server

Detect:

Disable:

Enable:

Mac Stop Microsoft Smb Domain Server Login

Note

You must restart the computer after you make these changes.

Registry Editor

Important

Follow the steps in this section carefully. Serious problems might occur if you modify the registry incorrectly. Before you modify it, back up the registry for restoration in case problems occur.

To enable or disable SMBv1 on the SMB server, configure the following registry key:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesLanmanServerParameters

To enable or disable SMBv2 on the SMB server, configure the following registry key:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesLanmanServerParameters

Note

You must restart the computer after you make these changes.

How to detect status, enable, and disable SMB protocols on the SMB Client

For Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, and Windows Server 2012

Note

When you enable or disable SMBv2 in Windows 8 or in Windows Server 2012, SMBv3 is also enabled or disabled. This behavior occurs because these protocols share the same stack.

SMB v1 on SMB Client

  • Detect

  • Microsoft sculpt ergonomic keyboard setup mac download. Disable:

  • Enable:

For more information, see Server storage at Microsoft

SMB v2/v3 on SMB Client

  • Detect:

  • Disable:

  • Enable:

Note

  • You must run these commands at an elevated command prompt.
  • You must restart the computer after you make these changes.

Disable SMBv1 Server with Group Policy

This procedure configures the following new item in the registry:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesLanmanServerParameters

  • Registry entry: SMB1
  • REG_DWORD: 0 = Disabled

To configure this by using Group Policy, follow these steps:

  1. Open the Group Policy Management Console. Right-click the Group Policy object (GPO) that should contain the new preference item, and then click Edit.

  2. In the console tree under Computer Configuration, expand the Preferences folder, and then expand the Windows Settings folder.

  3. Right-click the Registry node, point to New, and select Registry Item.

In the New Registry Propertiesdialog box, select the following:

  • Action: Create
  • Hive: HKEY_LOCAL_MACHINE
  • Key Path: SYSTEMCurrentControlSetServicesLanmanServerParameters
  • Value name: SMB1
  • Value type: REG_DWORD
  • Value data: 0

This disables the SMBv1 Server components. This Group Policy must be applied to all necessary workstations, servers, and domain controllers in the domain.

Note

WMI filters can also be set to exclude unsupported operating systems or selected exclusions, such as Windows XP.

Important

Be careful when you make these changes on domain controllers on which legacy Windows XP or older Linux and third-party systems (that do not support SMBv2 or SMBv3) require access to SYSVOL or other file shares where SMB v1 is being disabled.

Disable SMBv1 Client with Group Policy

To disable the SMBv1 client, the services registry key needs to be updated to disable the start of MRxSMB10 and then the dependency on MRxSMB10 needs to be removed from the entry for LanmanWorkstation so that it can start normally without requiring MRxSMB10 to first start.

This will update and replace the default values in the following 2 items in the registry:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesmrxsmb10

Registry entry: Start REG_DWORD: 4= Disabled

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesLanmanWorkstation

Registry entry: DependOnService REG_MULTI_SZ: 'Bowser','MRxSmb20″,'NSI'

Note

The default included MRxSMB10 which is now removed as dependency.

To configure this by using Group Policy, follow these steps:

  1. Open the Group Policy Management Console. Right-click the Group Policy object (GPO) that should contain the new preference item, and then click Edit.

  2. In the console tree under Computer Configuration, expand the Preferences folder, and then expand the Windows Settings folder.

  3. Right-click the Registry node, point to New, and select Registry Item.

  4. In the New Registry Properties dialog box, select the following:

    • Action: Update
    • Hive: HKEY_LOCAL_MACHINE
    • Key Path: SYSTEMCurrentControlSetservicesmrxsmb10
    • Value name: Start
    • Value type: REG_DWORD
    • Value data: 4

  5. Then remove the dependency on the MRxSMB10 that was just disabled.

    In the New Registry Properties dialog box, select the following:

    • Action: Replace
    • Hive: HKEY_LOCAL_MACHINE
    • Key Path: SYSTEMCurrentControlSetServicesLanmanWorkstation
    • Value name: DependOnService
    • Value type: REG_MULTI_SZ
    • Value data:
      • Bowser
      • MRxSmb20
      • NSI

    Note

    These three strings will not have bullets (see the following screen shot).

    The default value includes MRxSMB10 in many versions of Windows, so by replacing them with this multi-value string, it is in effect removing MRxSMB10 as a dependency for LanmanServer and going from four default values down to just these three values above.

    Note

    When you use Group Policy Management Console, you don't have to use quotation marks or commas. Just type the each entry on individual lines.

  6. Restart the targeted systems to finish disabling SMB v1.

Summary

If all the settings are in the same Group Policy Object (GPO), Group Policy Management displays the following settings.

Testing and validation

After these are configured, allow the policy to replicate and update. As necessary for testing, run gpupdate /force at a command prompt, and then review the target computers to make sure that the registry settings are applied correctly. Make sure SMB v2 and SMB v3 is functioning for all other systems in the environment.